Unique design of the Disposable Concrete Anchor Strap provides a temporary anchorage on concrete forms.

The Rebar Hook Anchor is designed to facilitate anchoring to scaffolding, pipe or angle iron.

The Beamer 2000 Beam Anchor is designed specifically for use at a worker’s feet or overhead.

The Vertical Beamer provides a stationary attachment point for an I- or H-beam. It can be used on vertical, angled or horizontal columns.

The Pass-Thru Anchor Sling attaches quickly and easily to scaffolding, piping or other small diameter points of attachment.

The 2’ Choker Anchor Sling has a top loop which wraps around scaffolding, piping or other small diameter points of attachment.

The durable stainless steel WireForm Anchor is designed for use on scaffolding or pipe racks.

The rugged GripAnchor can be mounted either vertically or horizontally and has a minimum breaking strength of 10,000 lb.

Shadow Beam Anchors are designed to be installed horizontally on the flange of compatible H- or I-beams, gripping the beam and sliding with the worker, providing increased mobility and safety. Fixed model can be tightened down for permanent installation.

This steel anchorage connector can be attached to horizontal I-beams, S-beams and W-beams.

The Miller ShadowLite Beam Anchor is designed to attach to flanged I-beams from 3” to 14” wide and up to 1-1/4” thick. The quick-click adjustment and unique positive-locking engagement system combine to make this beam anchor one of the easiest and most versatile to use.

The Miller Grip Fall Protection Anchorage Connector is a reliable anchorage point for use in concrete applications.

The lightweight Beam Trolley is a steel anchorage connector designed to move along an I-beam above a worker, providing an anchorage point that moves with the worker.

The rugged reusable 10K Concrete Anchor installs easily in cured concrete and provides a 10,000-lb capacity anchorage point for a single user connection. It can be used with the Cable Horizontal Lifeline System (part no. 04800).

The reusable Concrete Anchor installs easily in cured concrete and provides a 5,000-lb capacity anchorage point for a single user connection. It is ideal for anchoring scaffolding.

Use the Looped Cross-Arm Strap when you need a secure anchor point for lanyards or other connecting devices.

The extremely rugged Premium Cross Arm Strap is made of dual reinforced webbing with heavy-duty stitching. A durable wear pad protects webbing against abrasion and snags.

The Cross Arm Strap is a reliable anchorage connector ideal for a variety of applications.

Use the Cross-Arm Strap when you need a secure anchor point for lanyards or other connecting devices.

The Cross-Arm Chain is easy to secure to I-beams and other structures to form a temporary anchorage connector.

Use the Cross-Arm Strap when you need a secure anchor point for lanyards or other connecting devices.

The Extension Pole and Hook are designed to secure overhead anchorage connections where quick, temporary overhead anchorage is critical.

The Bolt-On D-Ring can be mounted vertically or horizontally to provide a reliable anchorage point for fall protection equipment.

This sturdy anchorage connector serves as a permanent tie-off point for a wide variety of construction, industrial and maintenance applications.

The Push-Thru Eye Bolt anchorage connector can be used in a wide variety of applications.

The Miller Grip Multi-Use Anchorage Connector provides a convenient and secure connection point in properly cured concrete. It is ideal for anchoring scaffolding or other structures and can be used in material handling, lifting or demolition applications.

In some applications, lifeline anchorage points must be created in walls or rock faces by inserting a friction bolt. The reusable Miller Grip Friction Bolt Anchorage Connector fastens securely into a friction bolt with a 1-1/2" outside diameter.

The Mounted D-Ring provides a compatible anchorage point for Miller connecting devices. Constructed of durable steel, the D-Ring and plate are designed to provide a variety of positioning alternatives.

A D-Bolt Anchor prevents rollout, which is the accidental disengagement of the snap hook.

The convenient Miller® Cable Anchorage Connector creates a secure point of attachment quickly and easily. It’s this simple: wrap the 1/4” vinyl-coated galvanized wire rope cable around an I-beam (or any structure able to withstand 5000 lb.) and connect the forged steel, auto-locking captive eye carabiner with a 1” gate opening to the thimble at the other end of the cable.

The 470 Wire Hook is fast and easy to install. Its stainless steel construction provides a safe anchorage point for a variety of gear, including railings, small I-beams, angle iron and scaffolding.